Skip to content
-
-
-
8.35 € excl. VAT
- Innovative MaticBox is a case for Raspberry Pi 4. It comes with a large set of components that make it applicable to a wide range of scenarios. It can be attached to any surface, including DIN rails. Multiple ventilation and cable slots as well as dedicated support for active cooling help keep the processor’s temperature down. INTERNATIONAL SHIPPING Available Quantity…
- Select options
-
-
-
8.35 € excl. VAT
- Innovative MaticBox is a case for Raspberry Pi and Asus tinker board. It comes with a large set of components that make it applicable to a wide range of scenarios. It can be attached to any surface, including DIN rails. Multiple ventilation and cable slots as well as dedicated support for active cooling help keep the processor’s temperature down. INTERNATIONAL…
- Select options
-
-
-
1.19 € excl. VAT
- Aluminium Heatsink Set for Raspberry Pi 4, 3 or 2 with pre-applied tape for easy installation 1 piece: 14 x 14 x 5 mm
- Add to cart
-
-
-
3.85 € excl. VAT
- It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. (as seen on the photos) The price is per one fan. Here you can find more information about MaticBox innovative case: MaticBox 4 Here you can read our article about fan efficiency and comparison: Which is the most efficient fan for…
- Add to cart
-
-
-
2.50 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this automatic fan MaticControl module you will be able to do this. Place it on pins 1-8. (As shown in the photos) And this is all you have to do on the hardware. Compatible with MaticBox Low Profile Cover and Automation Profile…
- Add to cart
-
-
-
4.20 € excl. VAT
- Keep your software safe from stealing with this MaticControl crypto module. Most microcontrollers are not designed to protect against snoopers, but a crypto-authentication chip can be used to lock away private keys securely. Once the private key is saved inside the chip, it can’t be read out, all you can do is send it challenge-response queries. That means that even…
- Add to cart
-
-
-
3.85 € excl. VAT
- Brushless Fan DC 5V It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. It van fit in MaticBox with the low profile cover. (as seen on the photos) The price is per one fan. Here you can find more information about MaticBox innovative case: MaticBox 4 Here you can read…
- Add to cart
-
-
-
2.75 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this MaticControl fan module you can! As a bonus, the second connector provides access to the 5V pins. Place it on pins 1-8. (As shown in the photos) And this is all you have to do on the hardware. It is comaptaible…
- Add to cart
-
-
-
3.85 € excl. VAT
- It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. (as seen on the photos) The price is per one fan. Here you can find more information about MaticBox innovative case: MaticBox 4 Here you can read our article about fan efficiency and comparison: Which is the most efficient fan for…
- Add to cart
-
-
-
23.60 € excl. VAT
- Do you need multifuntional relay HAT for your Raspberry Pi? With this MaticContorl Module you will have unlimited options for your Automation projects. You have Three Relays, RJ6 Connector + Cable form, Valet Button, LED diode for indication and three connectors on top - and all this on Single PCB board. Download the full PDF manual + schemes HERE Compatible…
- Add to cart
-
-
Out of Stock
-
12.50 € excl. VAT
- Ball Bearring Fan DC 5V with long life. It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. It van fit in MaticBox with the low profile cover. (as seen on the photos) The price is per one fan. Here you can find more information about MaticBox innovative case: MaticBox 4 Here…
- Read more
-
-
Out of Stock
-
5.90 € excl. VAT
- Brushless Fan DC 5V It is not compatible with the MaticBox fan adapter. But it can be placed directly on the case body as well. It van fit in MaticBox with the low profile cover. (as seen on the photos) The price is per one fan. Here you can find more information about MaticBox innovative case: MaticBox 4 Here you…
- Read more
-
-
-
15.80 € excl. VAT
- comply with EN55022, CLASSA universal AC input Small volume,low weight,high efficiency Protections:short circuit/over load/over voltage cooling by free air convectio can be installed on DIN rail: TS-35/7.5or TS-35/15 LED indicator for power on 100% full load burn-in test
- Select options
-
-
-
3.50 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C /TxD /RxD pins and third connector provides access to the 5V pins. I2C pins along with a 3.3V pin are often used to connect displays…
- Add to cart
-
-
Out of Stock
-
6.20 € excl. VAT
- The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer. 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) 2m white cable Nickel-plated plugs 4Kp60 compliant RoHS compliant 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
- Select options
-
-
Out of Stock
-
8.75 € excl. VAT
- The official and recommended USB-C power supply for Raspberry Pi 4
- Read more
-
-
Out of Stock
-
45.00 € – 54.20 € excl. VAT
- Your tiny, dual-display, desktop computer …and robot brains, smart home hub, media centre, networked AI core, factory controller, and much more
- Select options
-
-
-
19.99 € excl. VAT
- PoE HAt compatible with MaticBox. As seen on the pictures you can add also a fan cooling. Specification: Compliant IEEE802.3af PoE standard Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch Support 48V~57V Passive Power Over Ethernet PoE Switch Support 48V~57V Passive Power Over Ethernet PoE injector Support Power sourcing equipment (PSE) Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-) Isolation: 2.5kV…
- Add to cart
-
-
-
5.75 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this automatic fan MaticControl module you will be able to do this. As a bonus you also have crypto-module for protecting your software from stealing. Place it on pins 1-8 and connect your fan to the connector on the top. And this…
- Add to cart
-
-
-
6.50 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C pins and 3,3V power supply. I2C pins along with a 3.3V pin are often used to connect displays or other modules that use an I2C…
- Add to cart
-
-
Sale!
-
12.45 € 9.96 € excl. VAT
- Innovative MaticBox is a case for Raspberry Pi 5. It comes with a large set of components that make it applicable to a wide range of scenarios. It can be attached to any surface, including DIN rails. Multiple ventilation and cable slots as well as dedicated support for active cooling help keep the processor’s temperature down. INTERNATIONAL SHIPPING Available
- Select options
-
-
-
7.25 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C /TxD /RxD pins and third connector provides access to the 5V pins. I2C pins along with a 3.3V pin are often used to connect displays…
- Add to cart
-
-
-
6.75 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically, while also protect your data with a crypto module? With this MaticControl crypto fan module you can! As a bonus, the second connector provides access to the 5V pins. Place it on pins 1-8 and connect your fan to the connector on the…
- Add to cart
-
-
-
3.00 € excl. VAT
- Do you want to extend the life of your fan, reduce its noise and control it automatically? With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C pins. I2C pins along with a 3.3V pin are often used to connect displays or other modules that use an I2C pins Place it on…
- Add to cart
-
-
Out of Stock
-
5.00 € excl. VAT
- Manufacturer: GOODRAM Type of data storage: device memory card Kind of card: SD HC Micro Storage capacity: 16GB Read speed: 100MB/s Write speed: 10MB/s Speed class Class: 10 UHS U1 PC accessories features: Full HD 1080p
- Read more
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT Privacy & Cookies Policy
