MaticControl Crypto Module for Raspberry Pi
3.50 € excl. VAT
Keep your software safe from stealing with this MaticControl crypto module. Most microcontrollers are not designed to protect against snoopers, but a crypto-authentication chip can be used to lock away private keys securely. Once the private key is saved inside the chip, it can’t be read out, all you can do is send it challenge-response queries. That means that even if someone gets hold of your hardware and can read back the firmware, they won’t be able to extract it!
Place it on pins 1-8. And this is all you have to do on the hardware.
Due to the world chip shortage you can buy only one HATL01C per order.
The ATECC608 is the latest crypto-auth chip from Microchip and to make working with the it as easy as possible, we’ve put it on a PCB . This allows you to use it with Raspberry Pi or other similarly equipped boards without needing to solder.
ATECC608 uses I2C to send/receive commands. It will work with 3.3V or 5V power/logic micros, so it’s ready to get to work with a range of development boards. Once you ‘lock’ the chip with your details, you can use it for ECDH and AES-128 encrypt/decrypt/signing. There’s also hardware support for random number generation, and SHA-256/HMAC hash functions to greatly speed up a slower micro’s cryptography commands.
For our surprise this chip does not have a public datasheet,but it is compatible with the ATECC508 earlier version which does, so please refer to that complete datasheet as well as the ATECC608 summary sheet. The good news is that, despite not having complete documentation, there is some software support.For Python and C/C++ check out Microchips Cryptoauthlib .
Please note the I2C address is fixed at 0x60 and according to Microchip, you should use this at higher I2C speeds like 400KHz if other devices are on the I2C bus, to avoid some I2C bus contention
For More detailed information download the PDF
Note: This MaticControl module covers the pins for: 5V / 3,3V power supply, I2C, GPIO14 (RXD) and GPIO14 (TXD). If you want to use them, we offer modules (HATs) that provide access to these pins via separate connectors on the top of the board.