HATM02F – Three Relay module for Raspberry Pi

23.60  excl. VAT

Do you need multifuntional relay HAT for your Raspberry Pi?

With this MaticContorl Module you will have unlimited options for your Automation projects. You have Three Relays, RJ6 Connector + Cable form, Valet Button, LED diode for indication and three connectors on top – and all this on Single PCB board. 

Download the full PDF manual + schemes HERE

Compatible with MaticBox Automation cover
Not compatible with the stacking feature of MaticBox

 

Description

I. Included

1. PCB board -1pc.
2. Cable RJ6 -1pc.
3. Male Connectors for JP3, JP5, JP6 -3pcs.
4. Pitch terminal – 12pcs.

II. Components

1. Relays
The board has 3 relays with the possibility of switching up to 250V AC and max current up to 3A.
Relay 1 has both NO and NC outputs. Relays 2 and 3 have only NO output.
All three relays have a common end of the contact system.

2. Connector RJ6
RJ6 has 5 input/output ports. (Inputs Up to 24V, Active – Low level) I/O 1 – universal input/output port. I/O 2 – universal input/output port. I/O 3 – combined with built-in Raspberry Pi One Wire interface. (it is chosen whether it is I/O or One Ware with a jp4) I/O 4 – universal input/output port or serial (UART) I/O 5 – universal input/output port.

3. LED diode
Two-color LED – red/green. If combined – yellow.

4. Buzzer
There is a buzzer for sound signaling without its own generator. It is connected to the Raspberry Pi pin with built-in PWM with which the client can choose the frequency and sounds of the buzzer. It is desirable that the fill factor is not more than 10%.

5. Button
Valet Button – for service needs.

6. Top Connectors
I2C port – JP5
For infrared port or other universal application – JP6
For external 5V power supply – JP3

Download the full PDF manual + schemes HERE

Compatible with MaticBox Automation cover
Not compatible with the stacking feature of MaticBox

Additional information

Weight 0.1 kg