An innovative case for Raspberry Pi 4
10 features in 1 case
The universal mounting base is designed such that it can be easily attached to any surfaces or objects, including a DIN rail. The screw holes in the four corners allow the base to be attached to flat surfaces. When this is not an option, the base features eight slots which are compatible with cable (zip) ties to attach the box to irregular objects.
This is made possible by the innovative design of the feet, patented by LeapMatic. Their special shape provides a secure connection to the case underneath.
Multiple ventilation slots and a Fan adapter.
MaticBox has multiple ventilation slots that provide a natural air flow that disperses the heat from the single board computer. An active fan ca be attached directly into the case as well. This is helpful in case of an extension board that limits the available space above the processor.
The provided fan attachment can be attached to the case’s body as well and allow for mounting 25 * 25 mm fans with height from 5 mm to 10 mm, working on either 5V or 3.3V. Attachment’s vertical columns are designed to securely hold fans with different heights. The provided fan spacer helps accommodate CPU heat sinks and low profile fans. Fan attachment can be rotated 180 degrees to accommodate different CPU locations.
Low profile cover
Low profile cover can be used when no extension boards are present, or when the extension boards are relatively thin and do not contain large elements. With this cover, the case has one of the lowest heights in the market – just 28.5 mm.
MaticBox set also includes an automation cover which is useful when the case hosts extension boards with large elements, such as relays and terminals. The cover features a cutout on the short side for access to terminals on the extension board. When the cutout is not needed, the provided screen can cover it. When only a partial cutout is needed, portions of the screen can be broken away alongside the provided grooves.
MaticBox’s overall dimensions, including the automation cover, allows it to be mounted in a standard electrical panel with a DIN rail.
Place for stickers, labels and other.
For your convenience, we provided special areas where you can put stickers and
project labels. They are indented and there is no danger of your markings falling
off or peeling off. The four places are located on the tall and low cover,
underneath the body, as well as on the multifunctional base
Place for a light indicator / LED
The round hole on the low and tall covers can provide access to a LED on your extension board. So you can communicate visual status to your users
Slots for cables
No matter which cover you use, you will always have a place to run the cables outside the MaticBox. Three of the side walls have an openings that serve both to improve ventilation and to route cables/ports for connecting peripherals.
10 features in 1 case
1.Low profile cover
3.Grooved screen to close the automation cover gap
6. Ability to attach a fan directly inside the case
7. Ability to screw the base to surfaces
8. Ability to attach the base with cable (zip) ties
9. Ability to attach the base to a DIN rail
10. Ability to stack the cases